

Pool Openings

-
Remove, clean, and store pool cover
-
Reset deck anchors for in-ground pools
-
Install all components & fittings, including ladders and handrails
-
Assemble, run, and inspect critical pool equipment
-
Lubricate fittings, valves, o-rings, and plugs
-
Assemble and inspect skimmer basket and housing
-
Backwash filter
-
First chlorine shock treatment
-
Troubleshoot any other pool system as needed
Not Included with Opening Services
-
Removal of water and debris from above ground pool covers or inground tarp covers.
-
Will remove leaf net cover if one is installed
-
PREMIUM SERVICES
Advanced Water Chemistry Testing
Start the year off with a full analysis of your pool's water. This is your typical pool store service done fast & easy right in your own backyard.
-
Remove pool accessories (skimmer baskets, return fittings, ladders rails, etc.).
-
Backwash filter if necessary
-
Disassemble pool equipment (pump, filter, heater, etc.)
-
Drain all pool equipment of water
-
Lubricate fittings, valves, O-rings, and plugs
-
Remove water from suction, return, and main drain lines
-
Add anti-freeze to skimmer lines
-
Plug and seal all suction and return lines
-
Install and secure winter cover
Pool Closing Service

Fall & Winter Services
Winter Watch Program - (One Visit Per Month)
-
Test and balance pH, alkalinity and calcium
-
Ensure the proper dispersal of chemicals (Chemicals not included)
-
Maintain proper water levels
-
Inspect the winter cover pump and ground-fault circuit-interrupter (GFCI) switches
-
Clean debris from covers and remove from pool area (1 hour limit)
-
Maintain a secure & protective cover by examining rubber straps, springs, water bags and anchors and replacing as needed.
-
Visual inspection of all equipment
Single Services
-
Winter cover debris removal
-
Rescue and reset winter covers
